care
To clean oiled smooth leather footwear, remove all dirt and debris from the footwear surface using a damp cloth. For embedded dirt, use Sof Sole Saddle Soap, applying a small amount to a dry cleaning cloth and gently rubbing the footwear surface in a circular motion. Continue rubbing well into the leather until the saddle soap is no longer visible. Wipe off any excess saddle soap with a clean, damp cloth. On heavy work type leathers, apply a leather conditioner such as Boot World Mink Oil to help waterproof/soften the leather and keep it from drying out over time. For dress leathers, apply Bic 4. For best results, test mink oil or the Bic 4 in an inconspicuous area as it may darken some leathers. Allow your footwear to dry naturally in a ventilated room. For maximum waterproofing and preservation in harsh conditions, use Atsko Sno-Seal Original Beeswax Waterproofing Wax.
Care Recommendations
- Remove dirt and debris with a damp cloth
- For embedded dirt, use Sof Sole Leather Saddle Soap
- Gently rub the footwear surface in a circular motion
- Wipe off any excess soap with a clean, damp cloth
- Depending on the leather, after the cleaning, use Boot World Mink oil for smooth work leathers, and for dress leathers use Bic 4 to recondition.
- Allow footwear to dry in a naturally ventilated room
- For maximum waterproofing use Atsko Sno-Seal Original Beeswax Waterproofing Wax
Keen UTILITY
KEEN creates original and versatile products, improves lives, and inspires outside adventure. They are committed to reduce their impact on the environment, protect the places where we play, and give back to communities in need. In 2009, KEEN Utility work boots were born. While they may not be the oldest boots on the block, they’re unquestionably the hardest working. Designed to enable tradesmen and tradeswomen to work tirelessly every day. KEEN Utility boots keep them safe and comfortable on the job so they can keep doing what they do, day in and day out. KEEN American Built shoes and boots are assembled with pride and tireless attention to fit, quality, and comfort using quality materials sourced from around the world.
fit
Length:
Width :
- This product is in Men's U.S. sizing
- You may return merchandise purchased online for size, fit, or style reasons within 60 days of shipment of your order, provided it has not been damaged or worn. For more information, please visit our Customer Service page
- For more information on how a boot or shoe should fit, please click here
specifications
Sole Durability: 4 - High Sole Durability
low
High
Slip Resistance: 3 - Average Slip Resistance
None
S/R Plus
- Sizing: Men
- Upper Material: Leather, Nylon/Mesh, Rubber/PVC
- Lining Material: Mesh, Moisture Wicking Linings
- Footwear Shank: Composite
- Footwear Sole Construction: Injected
- Non-Marking Sole: Yes
- Defined Heel: Low
- Country Of Origin: United States
- Weight (Single): 1 lb 14 oz
- Profession: Construction, Drilling / Mining, Maintenance / EVS, Warehouse / Distribution
- Best Use: Work/Utility
- Footwear Style: Boots, Lace-Up, Motorcycle
- Footwear Features: Abrasion Resistant Toes, Breathable Linings, Flexible, Insole - Removable Cushion, Insole Material - Polyurethane, Non-Marking Sole, Padded Collar, Padded Tongue, Shock Absorbing Outsole, Safety Toe - Composite, Electric Hazard Rated, Oil Resistant Sole, Slip Resistant, Safety Toe, Waterproof
Features
-
Electric Hazard Rated
-
Oil Resistant Sole
-
Safety Toe
-
Waterproof
-
Slip Resistant
The last thing you need while on your feet all day with physically demanding work is a stiff, hefty work boot. The men’s KEEN Utility Troy 6" KBF Carbon Fiber Safety Toe Waterproof Work Boot is one tough boot made to bend and flex with ease and ready for work.
The KEEN Utility Troy is designed with a full-grain oil-tanned leather upper, legendary KEEN comfort, and flexibility, making kneeling and twisting motions much easier. This leather work boot comes equipped with an abrasion-resistant toe and ultra-flexible KEEN.BELLOWS FLEX multidirectional TPU groove panels that sit atop the foot allowing the boot to bend, twist, and flex with ease where agility is needed the most. The Troy also has you covered with waterproof protection, a lightweight and roomy carbon fiber safety toe, EH rated protection, and slip and heat resistant rubber outsole rated up to 572° F. KEEN comfort is built into the padded collar and tongue, polyurethane pillow top cushion insole, and polyurethane midsole for shock mitigation and stable support.
Proudly built in the USA, the KEEN Troy is the perfect fit for tradespeople where comfort and agility are a must-have.
FEATURES LIST
- American Built Using the Finest Material from Around the World
- Premium Oil-Tanned Leather Upper
- 6" Shaft Height with Padded Tongue & Collar for Ankle Comfort & Support
- 1.5” Heel Height
- Finger Loops for Easy On
- Traditional Lacing System with Top Speed/Lace Hooks for a Quick & Secure Fit
- KEEN.PROTECT Patented Toe Protection Toe Bumpers for Ultimate Protection & Increased Durability
- TPU KEEN.BELLOWS FLEX Technology Allows Optimal Bending & Flexing
- Sloped Shaft for Better Range-of-Motion While Walking or Driving
- 90 Degree Heel Offers Better Stability for Ascending & Descending Ladders, Poles, & Structures
- Lined with Moisture Wicking Linings & KEEN.DRY Breathable Waterproof Membrane for Complete Weatherproofing & All-Season Comfort
- Removable Dual Density Polyurethane Footbed with Aerated Pillow-Top Cushioning for All-Day Comfort & Support
- LuftCore Air-inject Core for Additional Heel Cushioning & Shock Absorption
- KEEN Luftcell Air-infused Polyurethane Midsole for Weightless Shock Absorbing Comfort & Stability
- Nylon Shank for Midfoot Support & Stability
- Long Wearing Oil- & Slip-Resistant Non-Marking Rubber Outsoles for Grip & Traction
- Rubber Outsoles Are Heat-Resistant Rated up to 572° F / 3° C
- Direct-Attach Polyurethane Construction for a Strong Bond Between the Upper & Outsole
- Electrical Hazard Rated
- Left & Right Asymmetrical Carbon Fiber Toes
- Meets and/or Exceeds ASTM F2412 & F2413 M I/75 C/75 For Impact & Compression & EH Rated Safety Requirements
- Meets and/or Exceeds ASTM F1677-96 MARK II Non-slip Testing Standards
